cmvr-es/protos/cmvr/config/motor_config/motor_config.proto

116 lines
2.4 KiB
Protocol Buffer

syntax = "proto3";
package cmvr.config;
import "cmvr/config/joint_limits_config.proto";
message MotorConfigItem {
int32 id = 1;
string joint_name = 2;
double limit_q_lb = 3;
double limit_q_ub = 4;
double limit_qd = 5;
double limit_qdd = 6;
double encoder_counts_per_rev = 7;
double gear_ratio = 8;
}
message MotorList {
repeated MotorConfigItem motors = 1;
}
message EthercatSlaveConfig {
int32 motor_id = 1;
uint32 alias = 2;
uint32 position = 3;
}
message Cia402ProtocolConfig {
uint32 state_transition_timeout_ms = 2;
uint32 velocity_stop_timeout_ms = 3;
uint32 status_poll_period_ms = 4;
double stopped_velocity_tolerance_rad_s = 5;
}
message ZeroCalibrationConfig {
uint32 timeout_ms = 1;
uint32 poll_period_ms = 2;
uint32 stable_sample_count = 3;
uint32 position_tolerance_counts = 4;
uint32 stable_delta_counts = 5;
}
message EtherCATDcConfig {
optional bool enable = 1;
optional int32 reference_motor_id = 2;
optional uint32 sync0_cycle_us = 3;
optional int32 sync0_shift_us = 4;
optional uint32 sync_reference_clock_period = 5;
optional uint32 assign_activate = 6;
optional uint32 sync_monitor_period_ms = 7;
}
message SocketCanConfig {
string dev_id = 1;
int32 channel_id = 2;
}
message EtherCATConfig {
uint32 master_index = 1;
int32 cycle_us = 2;
Cia402ProtocolConfig cia402 = 3;
EtherCATDcConfig dc = 4;
optional uint32 slave_op_timeout_ms = 5;
optional uint32 slave_state_poll_period_ms = 6;
ZeroCalibrationConfig zero_calibration = 7;
repeated EthercatSlaveConfig slaves = 10;
}
message MujocoMotorGroupConfig {
string world_id = 1;
}
enum MotorBusType {
MOTOR_BUS_UNKNOWN = 0;
MOTOR_BUS_CAN = 1;
MOTOR_BUS_ETHERCAT = 2;
MOTOR_BUS_MUJOCO = 3;
}
enum MotorVendor {
MOTOR_VENDOR_UNKNOWN = 0;
MOTOR_VENDOR_TI5 = 1;
MOTOR_VENDOR_MUJOCO = 2;
MOTOR_VENDOR_EYOU = 3;
}
enum MotorProtocol {
MOTOR_PROTOCOL_UNKNOWN = 0;
MOTOR_PROTOCOL_CANOPEN = 1;
MOTOR_PROTOCOL_ETHERCAT_CIA402 = 2;
MOTOR_PROTOCOL_MUJOCO = 3;
}
message MotorGroupConfig {
string id = 1;
MotorBusType bus_type = 2;
MotorVendor vendor = 3;
MotorProtocol protocol = 4;
oneof bus_config {
SocketCanConfig can = 10;
EtherCATConfig ethercat = 11;
MujocoMotorGroupConfig mujoco = 12;
}
JointLimitsConfig joint_limits = 30;
MotorList motors = 40;
}
message MotorConfig {
string id = 1;
repeated MotorGroupConfig motor_groups = 2;
}
message MotorRootConfig {
MotorConfig motor = 1;
}